Phasys 4500 - INVERTER 4500VA |
|
|
|
|
|
|
The PHASYS inverter modules have been designed to be used either in parallel operation or as a stand-alone solution.
The built-in static by-pass provides additional reliability of the module in case of disturbance or failure.
The LEDs provide immediate diagnostics on the inverter status, measurements and alarms. Stand-alone modules are also provided with LCD display.
ADVANTAGES
- switch mode technology
- parallel operation with internal static by-pass
- ECO-MODE function
- microprocessor control with CAN-BUS system communication
- pure sine wave output
- hot-swap & hot plug-in
TECHNICAL DATA
| Input voltage |
48V DC (40 - 58V DC) |
| Output voltage |
208* - 220 - 230 - 240V AC
single-phase (settable) |
| Output frequency |
50 / 60 Hz (± 0.05%) |
| Output power |
4500VA |
| Total Harmonic Distortion |
< 5% (linear load) |
| Static output voltage tolerance |
± 4 % Vout |
| Crest factor |
3:1 |
| Efficiency (typical) |
³ 86% |
| Overload |
105% Pout nom. permanent, 120% Pout nom for 20 sec
short circuit for ³ 200 ms |
| EMC Emission |
complies with EN50081-2 |
| EMC Immunity |
complies with EN61000-4-6 (EN50082-2),
EN61000-4-3 |
| Cooling |
fan cooling with intelligent fan speed control |
| Static by-pass |
integrated |
| Dimensions (W x D x H) mm |
19" x 460 x 133 (3U) |
| Weight |
19 kg |
|
Working temperature |
|
|
without derating
with derating |
0 °C to +40°C
+40 °C to +50 °C |
| Relative humidity |
10% to 90% |
| * with Pout derating |
|
