Home arrow Technical Specifications: UPS Power Dialog Plus

Technical Specifications: UPS Power Dialog Plus

 «back
MODELS PWP 600 PWP 650 PWP 800 PWP 1000
INPUT
Voltage 230 Vac single-phase 230 Vac single-phase or 400 Vac three-phase with neutral
Rated power 6000 VA 6500 VA 8000 VA 10000 VA
Frequency 50/60 Hz ± 5 Hz
OUTPUT AND INVERTER OUTPUT
Rated power 6000 VA 6500 VA 8000 VA 10000 VA
Dynamic stability ≤ 5% in 20ms
Number phases 1
Active power 4200 W 4600 W 5600 W 7000 W
Static stability ± 1 %
Crest factor (Ipeak/Irms) 3 : 1
Voltage distortion with linear load <2%
Waveform Sinewave
Frequency 50/60 Hz selectable or with autorange
Voltage distortion with distorcing load <5%
OVERLOAD TIMES
Load = 150% 0.5 s
Load > 150% 0.5 s
BY PASS
Frequency tolerance Selected frequency ± 5Hz
Voltage tolerance 180÷264 Vac (selectable in Economy Mode and SMART ACTIVE Mode)
BATTERIES
Recharge time 6÷8 h
ENVIRONMENTAL
Line-Interactive/Smart Active efficiency 98%
Relative humidity <90% non condensing
Operating temperature 0 ÷ 40 °C
Noise <40 dBA at 1 m
AC/AC efficiency 91% Input single-phase 91% Input three-phase 92%
Protections Overload - short-circuit - overvoltage - undervoltage - temperature - low battery
EMC conformance EN 50091-2 cl.A, Directive 89/336 EEC
Color Light grey RAL 7035
Safety compliance EN 62040-1-1, Directives 73/23/EEC and 93/68/EEC
Protection rating 3
OPTIONS
Double serial port board Multicom 352 yes
Communication software “full” version yes
RS232 and USB board Multicom 362 yes
JBUS/Modbus communication board Multicom 302 yes
Dry contacts + EPO input board Multicom 382 yes
LED-based remote control panel yes
Extended runtime battery boxes yes
CLEAN version yes
Network adapter for slot NetMan 102 yes
Isolation transformer module 500x400x265 mm / 80 Kg
Auxiliary serial connection yes
 
OPTIONS
Multicom 352 x x x x
Multicom 302 x x x x
Netman 102 x x x x
USB converter x x x x
Product characteristics may be changed to meet specific customer demands
 «back


Our Business is Protecting Your Business   
MARM UPS PTY LTD ABN 140 519 68 840
New South Wales office:  Unit 22, 80 Box Rd, Taren Point, NSW 2229, Australia (02) 9531 1999  map
Victorian office:  810 Princes Highway, Springvale, VIC 3171, Australia (03) 9574 6922  map

Home | What is a UPS? | About Us | Protection Selection | Service | Products | Documentation | Contact Us | Service&Support | Sitemap
© 2005 - 2012 Marm UPS Pty Ltd All Rights Reserved

  website development: OzWeb web design