Home arrow Technical Specifications: UPS Multi Dialog 40-80 (MDT)

Technical Specifications: UPS Multi Dialog 40-80 (MDT)

 «back
MODELS MDT 4000 MDT 6000 MDT 8000
INPUT
Voltage tolerance ± 20%
Frequency tolerance 50/60 Hz ± 10%
Voltage 400 Vac three-phase + N
Rated power 40000 VA 60000 VA 80000 VA
Power factor 0.95
OUTPUT AND INVERTER OUTPUT
Rated power 40000 VA 60000 VA 80000 VA
Dynamic stability ± 5% in 10 µs
Number phases 3 + N
Active power 32000 W 48000 W 64000 W
Static stability ± 1%
Crest factor (Ipeak/Irms) 3 : 1
Output current 58 A 87 A 116 A
Overload 125% 150% 200% of the rated current for 10' / 1' / 7"
Voltage distortion with linear load 2%
Waveform sinewave
Frequency 50/60 Hz selectable
BY PASS
Rated frequency 50/60 Hz
Number phases 3 + N
Rated voltage 400 Vac
Frequency tolerance ± 5% (selectable from ± 1% to ± 5%) ± 2% (selectable from ± 1% to ± 5%)
Voltage tolerance ± 15% (selectable from ± 5% to ± 25%)
BATTERIES
Type Maintenance-free sealed lead-acid
Recharge time 4÷8 h
ENVIRONMENTAL
Relative humidity 95% non condensing
Operating temperature 0 ÷ 40 °C
Noise <56 dBA at 1 m
AC/AC efficiency >92% in On-Line mode >98% in Economy Mode/Smart Active Mode/Emergency mode
EMC conformance EN 50091-2 Lev.A and Directives 73/23 EEC, 93/68 EEC, 89/336 EEC
Color Light grey RAL 7035
Remote controls EPO and bypass
Remote signals voltage free contacts
Safety compliance EN 62040-1
Protection rating 3
Communication Double RS232/C + slot for SNMP adapter
OPTIONS
Double serial port board Multicom 352 yes
Communication software “full” version yes
JBUS/Modbus communication board Multicom 302 yes
LCD-based remote control panel yes
LED-based remote control panel yes
Extended runtime battery boxes yes
Parallel kit (to order with the UPS) yes
CLEAN version yes
Network adapter for slot NetMan 102 yes
Isolation transformer module yes
 
OPTIONS
CLEAN version x x x
Included Active filter x x x
Multicom 352 x x x
Multicom 302 x x x
Netman 102 x x x
Product characteristics may be changed to meet specific customer demands
 «back


Our Business is Protecting Your Business   
MARM UPS PTY LTD ABN 140 519 68 840
New South Wales office:  Unit 22, 80 Box Rd, Taren Point, NSW 2229, Australia (02) 9531 1999  map
Victorian office:  810 Princes Highway, Springvale, VIC 3171, Australia (03) 9574 6922  map

Home | What is a UPS? | About Us | Protection Selection | Service | Products | Documentation | Contact Us | Service&Support | Sitemap
© 2005 - 2012 Marm UPS Pty Ltd All Rights Reserved

  website development: OzWeb web design