Electronic

The RE Series has a transformer with multiple sockets, each of which is connected electrically to a solid state switch. These switches are governed by a control plate with a built-in microprocessor, which controls the output voltage and, depending on its level, selects one socket or the other in order to obtain the optimal voltage level with the pre-programmed accuracy. It has a servo-system that compares the output voltage instead of controlling the input voltage.
With similar technology, the PLC series also has a transformer with galvanic isolation of low primary-secondary capacity, thus achieving a perfectly stable voltage and the elimination of all kinds of electrical noise.

Both series offer the assurance of a perfectly stabilised, “filtered” line supply.

Main features

• Powers from 300 VA to 200 kVA 
• Single phase and three phase (independent control) 
• 0 harmonic distortion and efficiency >95% 
• Output accuracy of 2% 
• The fastest regulation on the market: 20 ms 
• Input margin of ±15% (standard). ±20% or ±25% on request 
• Automatic static By-pass per phase (0 ms transfer) 
• Controlled by microprocessor with interface via free power contacts

Commercial characteristics

• Flexibility: devices tailor made for customers (VIN / VOUT)
• Technology based on transformers of proven reliability
• 100% independent phase regulation, standard 
• Protection of static by-pass by phase, standard 
• No mechanical components: no maintenance cost 
• Built-in voltmeter, free from 20 kVA 
• CE and TUV GS markings. Manufactured under ISO9001 
• World Leaders in Line Conditioners since 1970

Applications

• Peripherals: printers, modems, … 
• Satellite stations 
• Scientific and electronic equipment 
• Critical medical processes 
• Chemical laboratory equipment 
• Sensitive electronic components

Input

	Single phase Voltage	120 V, 220 V, 230 V, 240 V
	Three phase voltage	208 V, 220 V, 230 V, 240 V, 380 V, 400 V, 415 V
	Input range	±15%
	Frequency	48 ¸ 63 Hz
	Power factor	0,95

	Output

	Single phase Voltage	120V, 220V, 230V ó 240V
	Three phase voltage	208 V, 220 V, 230 V, 240 V, 380 V, 400 V, 415 V + N + T
	Accuracy	>±2%
	Nominal power	According to the table
	Frequency	48 ¸ 63 Hz
	Current	According to the table
	Harmonic distortion	Nil
	Response time	20 ms
	Efficiency	According to the power, 0,90 ¸ 0,98
	Permissible overload	100% for 1 minute 200% for 20 seconds 1.000% for 50 ms.

	Bypass

	Type	From 1 kVA above

	Environment

	Operating temperature	—40ºC ¸ +45ºC
	Relative humidity	0% a 95%, non-condensing
	Maximum altitude	3.000 m.
	MTBF	60.000 hours
	MTTR	30 min
	Noise level at 1m	<35 dB
	Natural cooling	Below <36 kVA
	Permissible power factor of the load	PLC with transformer (T): >40 dB
	Noise level attenuation in common mode	PLC with transformer (NS): >120 dB

	MODEL RE2 / PLC2 Single phase 230 V ±15% / 230 V	Pot. (kVA)	Int. (A)	MODEL RE2/PLC2 Three phase 3 x 400 V ±15% / 3 x 400 V	Pot. (kVA)	Int. (A)

	RE 309-2 / 2T	0,3	1,3	RET 3-4 /4T	3	4,3

	RE 609-2 / 2T	0,6	2,6	RET 6-4 /4T	6	8,7

	RE 1.009-2 / 2T	1	4,3	RET 9-4 /4T	9	13

	RE 2.009-2 / 2T	2	8,7	RET 13-4 /4T	13,5	20

	RE 3.009-2 / 2T	3	13	RET 18-4 /4T	18	26

	RE 4.509-2 / 2T	4,5	20	RET 27-4 /4T	27	39

	RE 6.009-2 / 2T	6	26	RET 36-4 /4T	36	52

	RE 9.009-2 / 2T	9	39	RET 50-4 /4T	50	72

	RE 12.009-2 / 2T	12	52	RET 60-4 /4T	60	87

	RE 15.009-2 / 2T	15	65	RET 75-4 /4T	75	108

	RE 20.009-2 / 2T	20	87	RET 100-4 /4T	100	145

	RE 25.009-2 / 2T	25	109	RET 125-4 /4T	125	181

	RE 30.009-2 / 2T	30	130	RET 150-4 /4T	150	217

	RE 40.009-2 / 2T	40	174

	RE 50.009-2 / 2T	50	217

For any other power, voltages and/or specifications and dimensions, please consult.