|
 PowerShield² provides efficient, user-friendly UPS management using bar chart displays to show major operational information such as the input voltage, UPS load % and
batteries charge %.
The software also provides detailed information on fault conditions and UPS operating
characteristics. PowerShield² has been developed with a client/server architecture that makes it flexible and easy to use, and provides multi-lingual and on-line support.
Characteristics
- Sequential and priority-based shutdown:
PowerShield² provides unattended shut-down of single and networked PCs, saving any active work and the most widely used applications Windows. Users can define their own shutdown procedures and establish the order in which critical computers (such as servers)
are to be powered down
- Multi-platform compatibility:
PowerShield² uses the TCP/IP comunications protocol to achieve standardised management and monitoring across the widest possible range of platforms.
This makes it possible to monitor computers with different operating systems from a single console, for example monitoring a UNIX server from a PC with Windows and also connecting to UPS located in different geographical areas using dedicated networks
(intranets) or the Internet
- Event scheduling:
PowerShield², users can program their own shutdown procedures, detailing power-off and
power-up scenarios to increase system safety and, equally important, power economy
- Messages management:
PowerShield² keeps users constantly informed about the status of their local and network UPS. A list can be defined of users who should receive e-mail messages,
faxes and SMS when faults or sudden blackouts occur
- Integrated SNMP agent:
PowerShield² features an integrated SNMP agent for management of the UPS. This agent is able to send all the UPS information and generate traps using the RFC
1628 MIB standard. This makes it possible to manage the UPS in compatible SNMP management stations such as HP Open View, Novell Managewise and IBM NetView
- Wap server integrated:
PowerShield² allows the user to monitor the UPS through WAP mobile phone
- Security, easy to use and connect:
communication is password protected to ensure UPS system security. Using the new discovery/browsing function, all the RIELLO UPS connected to a protected computer or LAN can be displayed in a list format. In the absence of a LAN connection, support is provided for modem-based communication.
Downloads
Note
- Multiplatform compatibility
- Client-server technology
- Microsoft Certified
- Included in all the UPS
Operating systems supported
Windows 2003
Windows NT 4.0 con Service Pack 6
Windows 2000 with Service Pack 3
Windows XP with Service Pack 2
Windows 95-OSR2, 98, Me
Novell Netware 3.12, 4.x
Novell Netware 6.5
Novell Netware 6.0 with Support Pack 1
Novell Netware 5.1 with Support Pack 3
Red Hat Linux v.7.3, 8.0 and 9.0
SuSE Linux v.7.2, 8.0, 8.1, 9.0 and 9.1
TurboLinux v.7.0 and 8.0
Debian Linux 3.0
IBM OS/2 Warp 4
IBM AIX 4.3.3, 5.1 and 5.2
HP UX 11.00 and 11.11 PA-RISC
HP OpenVMS 7.1 Alpha
Sun Solaris 8 and 9 SPARC
Sun Solaris 8 and 9 INTEL
Compaq TRU64 5.x
SCO Openserver 5.0.x
SCO Unixware 7.x
FreeBSD
MacOS 9.2 and MacOSX 10.2.x and 10.3
SGI Irix 6.5
NCR Unix 5.4
|
